This is the latest recevied telemetry packets stored in our database for station/object 9M2JHZ-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Satellite* | HDOP* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1780602597 | 3.29 V | 33 Pkts | 0.53 % | 0 | 0 |
| 1780602530 | 3.31 V | 36 Pkts | 0.62 % | 0 | 0 |
| 1780602465 | 3.3 V | 36 Pkts | 0.51 % | 0 | 0 |
| 1780602402 | 3.32 V | 35 Pkts | 0.57 % | 0 | 0 |
| 1780602337 | 3.33 V | 34 Pkts | 0.55 % | 0 | 0 |
| 1780602145 | 3.32 V | 35 Pkts | 0.5 % | 0 | 0 |
| 1780602081 | 3.32 V | 37 Pkts | 0.5 % | 0 | 0 |
| 1780602017 | 3.34 V | 37 Pkts | 0.54 % | 0 | 0 |
| 1780601953 | 3.34 V | 37 Pkts | 0.51 % | 0 | 0 |
| 1780601889 | 3.36 V | 38 Pkts | 0.48 % | 0 | 0 |
| 1780601825 | 3.34 V | 36 Pkts | 0.51 % | 0 | 0 |
| 1780601761 | 3.37 V | 35 Pkts | 0.53 % | 0 | 0 |
| 1780601696 | 3.35 V | 37 Pkts | 0.55 % | 0 | 0 |
| 1780601628 | 3.35 V | 39 Pkts | 0.51 % | 0 | 0 |
| 1780601564 | 3.35 V | 37 Pkts | 0.47 % | 0 | 0 |
| 1780601500 | 3.37 V | 35 Pkts | 0.55 % | 0 | 0 |
| 1780601436 | 3.38 V | 37 Pkts | 0.48 % | 0 | 0 |
| 1780601304 | 3.39 V | 35 Pkts | 0.52 % | 0 | 0 |
| 1780601240 | 3.39 V | 38 Pkts | 0.48 % | 0 | 0 |
| 1780601176 | 3.39 V | 35 Pkts | 0.48 % | 0 | 0 |
| 1780601112 | 3.39 V | 39 Pkts | 0.44 % | 0 | 0 |
| 1780601048 | 3.38 V | 40 Pkts | 0.48 % | 0 | 0 |
| 1780600984 | 3.39 V | 37 Pkts | 0.5 % | 0 | 0 |
| 1780600919 | 3.38 V | 36 Pkts | 0.48 % | 0 | 0 |
| 1780600855 | 3.41 V | 37 Pkts | 0.53 % | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.01, 0
Satellite: 0, 0.01, 0
HDOP: 0, 0.01, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)