This is the latest recevied telemetry packets stored in our database for station/object SR2LMU-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1780611532 | 62 Count | 562 Count | 33 Count | 4.1 VDC | 0 VDC |
| 1780610632 | 60 Count | 547 Count | 32 Count | 4.09 VDC | 0 VDC |
| 1780609732 | 58 Count | 533 Count | 31 Count | 4.1 VDC | 0 VDC |
| 1780608833 | 56 Count | 519 Count | 30 Count | 4.1 VDC | 0 VDC |
| 1780607933 | 53 Count | 493 Count | 28 Count | 4.1 VDC | 0 VDC |
| 1780607034 | 52 Count | 477 Count | 28 Count | 4.1 VDC | 0 VDC |
| 1780606135 | 49 Count | 460 Count | 26 Count | 4.1 VDC | 0 VDC |
| 1780605235 | 48 Count | 445 Count | 26 Count | 4.1 VDC | 0 VDC |
| 1780604335 | 45 Count | 412 Count | 24 Count | 4.1 VDC | 0 VDC |
| 1780603436 | 43 Count | 393 Count | 23 Count | 4.1 VDC | 0 VDC |
| 1780602536 | 41 Count | 369 Count | 22 Count | 4.1 VDC | 0 VDC |
| 1780601636 | 39 Count | 353 Count | 21 Count | 4.1 VDC | 0 VDC |
| 1780600737 | 36 Count | 320 Count | 19 Count | 4.1 VDC | 0 VDC |
| 1780599837 | 34 Count | 301 Count | 18 Count | 4.11 VDC | 1.22 VDC |
| 1780598937 | 31 Count | 272 Count | 16 Count | 4.11 VDC | 2.8 VDC |
| 1780598037 | 30 Count | 257 Count | 16 Count | 4.11 VDC | 4.34 VDC |
| 1780597148 | 27 Count | 242 Count | 14 Count | 4.11 VDC | 4.32 VDC |
| 1780596248 | 26 Count | 233 Count | 14 Count | 4.12 VDC | 4.32 VDC |
| 1780595338 | 23 Count | 215 Count | 12 Count | 4.11 VDC | 5.4 VDC |
| 1780594438 | 21 Count | 199 Count | 11 Count | 4.11 VDC | 5.4 VDC |
| 1780593539 | 19 Count | 184 Count | 10 Count | 4.11 VDC | 5.4 VDC |
| 1780592638 | 17 Count | 165 Count | 9 Count | 4.11 VDC | 5.4 VDC |
| 1780591739 | 15 Count | 135 Count | 8 Count | 4.11 VDC | 5.4 VDC |
| 1780590840 | 13 Count | 119 Count | 7 Count | 4.11 VDC | 5.4 VDC |
| 1780589040 | 9 Count | 92 Count | 5 Count | 4.11 VDC | 5.4 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)