This is the latest recevied telemetry packets stored in our database for station/object 2M0JUM-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1780632838 | 181 Count | 3 Count | 3 Count | 0 VDC | 0 VDC |
| 1780632235 | 180 Count | 3 Count | 3 Count | 0 VDC | 0 VDC |
| 1780631632 | 179 Count | 3 Count | 3 Count | 0 VDC | 0 VDC |
| 1780631029 | 178 Count | 3 Count | 3 Count | 0 VDC | 0 VDC |
| 1780630426 | 177 Count | 3 Count | 3 Count | 0 VDC | 0 VDC |
| 1780629822 | 176 Count | 3 Count | 3 Count | 0 VDC | 0 VDC |
| 1780629219 | 175 Count | 3 Count | 3 Count | 0 VDC | 0 VDC |
| 1780628616 | 174 Count | 3 Count | 3 Count | 0 VDC | 0 VDC |
| 1780628013 | 173 Count | 3 Count | 3 Count | 0 VDC | 0 VDC |
| 1780627410 | 172 Count | 3 Count | 3 Count | 0 VDC | 0 VDC |
| 1780626807 | 171 Count | 3 Count | 3 Count | 0 VDC | 0 VDC |
| 1780626204 | 170 Count | 3 Count | 3 Count | 0 VDC | 0 VDC |
| 1780625601 | 169 Count | 3 Count | 3 Count | 0 VDC | 0 VDC |
| 1780624998 | 168 Count | 3 Count | 3 Count | 0 VDC | 0 VDC |
| 1780624395 | 167 Count | 3 Count | 3 Count | 0 VDC | 0 VDC |
| 1780623792 | 166 Count | 3 Count | 3 Count | 0 VDC | 0 VDC |
| 1780623189 | 165 Count | 3 Count | 3 Count | 0 VDC | 0 VDC |
| 1780601096 | 128 Count | 3 Count | 3 Count | 0 VDC | 0 VDC |
| 1780600493 | 127 Count | 3 Count | 3 Count | 0 VDC | 0 VDC |
| 1780599890 | 126 Count | 3 Count | 3 Count | 0 VDC | 0 VDC |
| 1780599287 | 125 Count | 3 Count | 3 Count | 0 VDC | 0 VDC |
| 1780598683 | 124 Count | 3 Count | 3 Count | 0 VDC | 0 VDC |
| 1780598080 | 123 Count | 3 Count | 3 Count | 0 VDC | 0 VDC |
| 1780597477 | 122 Count | 3 Count | 3 Count | 0 VDC | 0 VDC |
| 1780596874 | 121 Count | 3 Count | 3 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)