This is the latest recevied telemetry packets stored in our database for station/object LZ1NAG-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1775193938 | 21.7 C | 43.16 % | 1008.25 hPa | 0 | 0 |
| 1775193569 | 17.3 C | 50.2 % | 1010.88 hPa | 0 | 0 |
| 1775193307 | 12.2 C | 67.07 % | 1011.13 hPa | 0 | 0 |
| 1775186851 | 26 C | 37.53 % | 1009.13 hPa | 0 | 0 |
| 1775186650 | 24.7 C | 39.53 % | 1008 hPa | 0 | 0 |
| 1775186329 | 21.4 C | 41.26 % | 1005.38 hPa | 0 | 0 |
| 1775185259 | 7.8 C | 73.33 % | 924.13 hPa | 0 | 0 |
| 1775137351 | 12.8 C | 65.23 % | 1005.88 hPa | 0 | 0 |
| 1775132863 | 17.3 C | 54.75 % | 1005.63 hPa | 0 | 0 |
| 1775132664 | 14.5 C | 63.32 % | 1001.5 hPa | 0 | 0 |
| 1775132519 | 12.1 C | 67.87 % | 1004.5 hPa | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)