This is the latest recevied telemetry packets stored in our database for station/object WA7DEM-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1791139687 | 14.22 Volts | 64.16 Deg.F | 0 | 0 | 0 |
| 1791132521 | 13.55 Volts | 56.24 Deg.F | 0 | 0 | 0 |
| 1791128938 | 13.4 Volts | 54.48 Deg.F | 0 | 0 | 0 |
| 1791127148 | 13.34 Volts | 54.48 Deg.F | 0 | 0 | 0 |
| 1791125356 | 13.31 Volts | 54.48 Deg.F | 0 | 0 | 0 |
| 1791118192 | 13.31 Volts | 54.48 Deg.F | 0 | 0 | 0 |
| 1791114610 | 13.31 Volts | 54.48 Deg.F | 0 | 0 | 0 |
| 1791112820 | 13.31 Volts | 54.48 Deg.F | 0 | 0 | 0 |
| 1791111028 | 13.31 Volts | 53.6 Deg.F | 0 | 0 | 0 |
| 1791109238 | 13.31 Volts | 53.6 Deg.F | 0 | 0 | 0 |
| 1791105656 | 13.28 Volts | 54.48 Deg.F | 0 | 0 | 0 |
| 1791102074 | 13.31 Volts | 54.48 Deg.F | 0 | 0 | 0 |
| 1791100282 | 13.31 Volts | 55.36 Deg.F | 0 | 0 | 0 |
| 1791093119 | 13.34 Volts | 57.12 Deg.F | 0 | 0 | 0 |
| 1791087747 | 13.37 Volts | 58.88 Deg.F | 0 | 0 | 0 |
| 1791085954 | 13.37 Volts | 58.88 Deg.F | 0 | 0 | 0 |
| 1791084164 | 13.4 Volts | 59.76 Deg.F | 0 | 0 | 0 |
| 1791080581 | 13.46 Volts | 62.4 Deg.F | 0 | 0 | 0 |
| 1791078788 | 13.49 Volts | 65.04 Deg.F | 0 | 0 | 0 |
| 1791075204 | 13.52 Volts | 68.56 Deg.F | 0 | 0 | 0 |
| 1791073412 | 13.52 Volts | 72.08 Deg.F | 0 | 0 | 0 |
| 1791066242 | 13.72 Volts | 66.8 Deg.F | 0 | 0 | 0 |
| 1791062657 | 13.96 Volts | 65.92 Deg.F | 0 | 0 | 0 |
| 1791060864 | 14.08 Volts | 65.92 Deg.F | 0 | 0 | 0 |
| 1791057279 | 14.22 Volts | 64.16 Deg.F | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.0293, 0.48
Temp: 0, 0.88, -470
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)