This is the latest recevied telemetry packets stored in our database for station/object VA2AIG-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vbat* | Ibat* | Text* | Pres* | Humd* |
|---|---|---|---|---|---|
| 1732527408 | 3.76 Volt | 0 ma | -4 C | 97240 Pa | 91 % |
| 1732527043 | 3.77 Volt | 0 ma | -4 C | 97240 Pa | 91 % |
| 1732526218 | 3.77 Volt | 0 ma | -4.1 C | 97280 Pa | 91 % |
| 1732525242 | 3.77 Volt | 0 ma | -4.1 C | 97280 Pa | 91 % |
| 1732525009 | 3.77 Volt | 0 ma | -4.1 C | 97280 Pa | 91 % |
| 1732523804 | 3.76 Volt | 0 ma | -4.1 C | 97280 Pa | 91 % |
| 1732523436 | 3.77 Volt | 0 ma | -4.2 C | 97260 Pa | 91 % |
| 1732522597 | 3.77 Volt | 0 ma | -4.3 C | 97260 Pa | 91 % |
| 1732521394 | 3.77 Volt | 0 ma | -4.2 C | 97240 Pa | 91 % |
| 1732520186 | 3.77 Volt | 0 ma | -4.2 C | 97240 Pa | 91 % |
| 1732519833 | 3.77 Volt | 0 ma | -4.3 C | 97240 Pa | 91 % |
| 1732518982 | 3.77 Volt | 0 ma | -4.3 C | 97220 Pa | 91 % |
| 1732518032 | 3.77 Volt | 0 ma | -4.3 C | 97220 Pa | 91 % |
| 1732517775 | 3.77 Volt | 0 ma | -4.3 C | 97220 Pa | 91 % |
| 1732516567 | 3.77 Volt | 0 ma | -4.3 C | 97220 Pa | 91 % |
| 1732516233 | 3.77 Volt | 0 ma | -4.3 C | 97220 Pa | 91 % |
| 1732515366 | 3.77 Volt | 0 ma | -4.2 C | 97200 Pa | 91 % |
| 1732514431 | 3.77 Volt | 0 ma | -4.2 C | 97180 Pa | 91 % |
| 1732514165 | 3.77 Volt | 0 ma | -4.2 C | 97200 Pa | 91 % |
| 1732512958 | 3.77 Volt | 0 ma | -4 C | 97200 Pa | 91 % |
| 1732512631 | 3.77 Volt | 0 ma | -4.1 C | 97180 Pa | 91 % |
| 1732511757 | 3.78 Volt | 0 ma | -4.1 C | 97180 Pa | 91 % |
| 1732510831 | 3.77 Volt | 0 ma | -4.1 C | 97180 Pa | 91 % |
| 1732510556 | 3.78 Volt | 0 ma | -4.1 C | 97180 Pa | 91 % |
| 1732509350 | 3.77 Volt | 0 ma | -4.1 C | 97180 Pa | 91 % |
*Used Equation Coefficients:
Vbat: 0, 0.01, 0
Ibat: 0, 1, -2000
Text: 0, 0.1, -50
Pres: 0, 20, 0
Humd: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)