This is the latest recevied telemetry packets stored in our database for station/object M7AQH-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TEMP* | HUM* | BARO* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1765030765 | 24.04 C | 60.22 % | 1628 hPa | 0 | 0 |
| 1765030163 | 24.11 C | 60.05 % | 1628 hPa | 0 | 0 |
| 1765029563 | 24.39 C | 59.94 % | 1628 hPa | 0 | 0 |
| 1765029552 | 24.39 C | 59.94 % | 1628 hPa | 0 | 0 |
| 1765029363 | 24.13 C | 59.6 % | 1628 hPa | 0 | 0 |
| 1765028763 | 24.29 C | 59.44 % | 1628 hPa | 0 | 0 |
| 1765028163 | 24.38 C | 59.61 % | 1628 hPa | 0 | 0 |
| 1765027573 | 24.36 C | 59.69 % | 1628 hPa | 0 | 0 |
| 1765026963 | 24.27 C | 59.86 % | 1628 hPa | 0 | 0 |
| 1765026363 | 24.18 C | 59.94 % | 1628 hPa | 0 | 0 |
| 1765025763 | 23.98 C | 60 % | 1628 hPa | 0 | 0 |
| 1765025163 | 23.89 C | 60.05 % | 1628 hPa | 0 | 0 |
| 1765024563 | 23.78 C | 60.69 % | 1628 hPa | 0 | 0 |
| 1765023963 | 23.67 C | 60.44 % | 1628 hPa | 0 | 0 |
| 1765023363 | 23.62 C | 60.16 % | 1628 hPa | 0 | 0 |
| 1765022763 | 23.54 C | 60.01 % | 1628 hPa | 0 | 0 |
| 1765022163 | 23.44 C | 59.63 % | 1628 hPa | 0 | 0 |
| 1765021563 | 23.4 C | 59.42 % | 1628 hPa | 0 | 0 |
| 1765020963 | 23.34 C | 59.63 % | 1628 hPa | 0 | 0 |
| 1765020363 | 23.2 C | 59.67 % | 1628 hPa | 0 | 0 |
| 1765019163 | 23.02 C | 59.39 % | 1628 hPa | 0 | 0 |
| 1765018563 | 23 C | 59.49 % | 1628 hPa | 0 | 0 |
| 1765017963 | 23.06 C | 59.42 % | 1628 hPa | 0 | 0 |
| 1765017363 | 23.17 C | 59.31 % | 1628 hPa | 0 | 0 |
| 1765016762 | 23.19 C | 59.32 % | 1628 hPa | 0 | 0 |
*Used Equation Coefficients:
TEMP: 0, 0.01, 0
HUM: 0, 0.01, 0
BARO: 0, 0.1, 800
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)