This is the latest recevied telemetry packets stored in our database for station/object KN4YDP-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1775317212 | 12.03 Volts | 39.17 Deg.C | 0 | 0 | 0 |
| 1775317093 | 12.03 Volts | 38.68 Deg.C | 0 | 0 | 0 |
| 1775316913 | 12.03 Volts | 38.68 Deg.C | 0 | 0 | 0 |
| 1775316853 | 12 Volts | 38.68 Deg.C | 0 | 0 | 0 |
| 1775316793 | 12.03 Volts | 38.68 Deg.C | 0 | 0 | 0 |
| 1775316733 | 12 Volts | 38.19 Deg.C | 0 | 0 | 0 |
| 1775316672 | 12 Volts | 38.19 Deg.C | 0 | 0 | 0 |
| 1775316253 | 12.03 Volts | 37.7 Deg.C | 0 | 0 | 0 |
| 1775316193 | 12 Volts | 37.7 Deg.C | 0 | 0 | 0 |
| 1775316131 | 12 Volts | 37.7 Deg.C | 0 | 0 | 0 |
| 1775316072 | 12 Volts | 37.7 Deg.C | 0 | 0 | 0 |
| 1775316011 | 11.97 Volts | 37.21 Deg.C | 0 | 0 | 0 |
| 1775315951 | 12 Volts | 37.21 Deg.C | 0 | 0 | 0 |
| 1775315892 | 11.94 Volts | 38.68 Deg.C | 0 | 0 | 0 |
| 1775315831 | 11.97 Volts | 37.21 Deg.C | 0 | 0 | 0 |
| 1775315772 | 11.97 Volts | 37.21 Deg.C | 0 | 0 | 0 |
| 1775315712 | 12 Volts | 37.21 Deg.C | 0 | 0 | 0 |
| 1775315653 | 11.97 Volts | 37.21 Deg.C | 0 | 0 | 0 |
| 1775315593 | 11.97 Volts | 38.19 Deg.C | 0 | 0 | 0 |
| 1775314752 | 11.94 Volts | 35.26 Deg.C | 0 | 0 | 0 |
| 1775314692 | 11.94 Volts | 35.26 Deg.C | 0 | 0 | 0 |
| 1775314632 | 11.94 Volts | 34.77 Deg.C | 0 | 0 | 0 |
| 1775314571 | 11.91 Volts | 34.77 Deg.C | 0 | 0 | 0 |
| 1775314453 | 11.91 Volts | 34.28 Deg.C | 0 | 0 | 0 |
| 1775314391 | 11.94 Volts | 33.79 Deg.C | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.02933, 0
Temp: 0, 0.48876, -273.15
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)