This is the latest recevied telemetry packets stored in our database for station/object KN4YDP-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1786120123 | 12.64 Volts | 45.52 Deg.C | 0 | 0 | 0 |
| 1786120002 | 12.64 Volts | 46.01 Deg.C | 0 | 0 | 0 |
| 1786119882 | 12.58 Volts | 45.52 Deg.C | 0 | 0 | 0 |
| 1786119763 | 12.52 Volts | 45.52 Deg.C | 0 | 0 | 0 |
| 1786119704 | 12.52 Volts | 45.03 Deg.C | 0 | 0 | 0 |
| 1786119642 | 12.49 Volts | 44.54 Deg.C | 0 | 0 | 0 |
| 1786119583 | 12.49 Volts | 43.57 Deg.C | 0 | 0 | 0 |
| 1786119524 | 12.41 Volts | 43.08 Deg.C | 0 | 0 | 0 |
| 1786119223 | 12.32 Volts | 39.66 Deg.C | 0 | 0 | 0 |
| 1786119162 | 12.35 Volts | 39.66 Deg.C | 0 | 0 | 0 |
| 1786119102 | 12.32 Volts | 39.66 Deg.C | 0 | 0 | 0 |
| 1786119042 | 12.38 Volts | 39.66 Deg.C | 0 | 0 | 0 |
| 1786118742 | 12.41 Volts | 39.17 Deg.C | 0 | 0 | 0 |
| 1786118682 | 12.47 Volts | 39.17 Deg.C | 0 | 0 | 0 |
| 1786118622 | 12.47 Volts | 39.17 Deg.C | 0 | 0 | 0 |
| 1786118502 | 12.52 Volts | 38.19 Deg.C | 0 | 0 | 0 |
| 1786118382 | 12.64 Volts | 36.24 Deg.C | 0 | 0 | 0 |
| 1786118142 | 13.08 Volts | 32.81 Deg.C | 0 | 0 | 0 |
| 1786118082 | 13.23 Volts | 31.84 Deg.C | 0 | 0 | 0 |
| 1786118021 | 13.46 Volts | 30.86 Deg.C | 0 | 0 | 0 |
| 1786116908 | 13.43 Volts | 25.97 Deg.C | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.02933, 0
Temp: 0, 0.48876, -273.15
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)