This is the latest recevied telemetry packets stored in our database for station/object DL6YA-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1775230217 | 719 C | 5233 % | 8119 hPa | 0 | 0 |
| 1775230156 | 717 C | 5237 % | 8115 hPa | 0 | 0 |
| 1775229794 | 709 C | 4874 % | 8161 hPa | 0 | 0 |
| 1775229760 | 707 C | 4776 % | 8167 hPa | 0 | 0 |
| 1775229745 | 707 C | 4776 % | 8168 hPa | 0 | 0 |
| 1775229676 | 705 C | 4798 % | 8168 hPa | 0 | 0 |
| 1775229642 | 702 C | 4673 % | 8171 hPa | 0 | 0 |
| 1775229627 | 702 C | 4673 % | 8163 hPa | 0 | 0 |
| 1775229611 | 702 C | 4673 % | 8156 hPa | 0 | 0 |
| 1775229596 | 702 C | 4673 % | 8154 hPa | 0 | 0 |
| 1775229507 | 695 C | 4657 % | 8173 hPa | 0 | 0 |
| 1775229491 | 695 C | 4657 % | 8170 hPa | 0 | 0 |
| 1775221126 | 706 C | 3383 % | 8120 hPa | 0 | 0 |
| 1775221111 | 706 C | 3383 % | 8125 hPa | 0 | 0 |
| 1775221086 | 722 C | 4253 % | 8137 hPa | 0 | 0 |
| 1775221071 | 722 C | 4253 % | 8134 hPa | 0 | 0 |
| 1775221038 | 716 C | 4104 % | 8122 hPa | 0 | 0 |
| 1775221023 | 716 C | 4104 % | 8125 hPa | 0 | 0 |
| 1775220945 | 710 C | 4025 % | 8131 hPa | 0 | 0 |
| 1775220724 | 701 C | 3735 % | 8143 hPa | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 1, 0
Rel_Hum: 0, 1, 0
Atm_Press: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)