APRS Track Direct

My position About ☰

reset

SP2RO-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP2RO-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	Digi*	V_Bat*
1791092212	11 Count	143 Count	2 Count	2.27 VDC
1791091311	9 Count	111 Count	1 Count	2.21 VDC
1791090410	8 Count	91 Count	1 Count	2.11 VDC
1791089509	7 Count	79 Count	1 Count	2.16 VDC
1791088609	6 Count	72 Count	1 Count	2.05 VDC
1791087708	5 Count	55 Count	1 Count	2.04 VDC
1791086807	4 Count	46 Count	1 Count	2.2 VDC
1791085906	2 Count	37 Count	0 Count	2.08 VDC
1791085006	1 Count	30 Count	0 Count	2.19 VDC
1791084105	0 Count	11 Count	0 Count	2.08 VDC
1791083204	69 Count	1012 Count	32 Count	2.2 VDC
1791082303	67 Count	996 Count	31 Count	2.12 VDC
1791081402	66 Count	987 Count	31 Count	2.01 VDC
1791080501	63 Count	957 Count	29 Count	2.18 VDC
1791079601	62 Count	927 Count	29 Count	2.09 VDC
1791078700	59 Count	886 Count	27 Count	2.1 VDC
1791077799	58 Count	866 Count	27 Count	2.11 VDC
1791076898	55 Count	827 Count	25 Count	2.21 VDC
1791075998	54 Count	792 Count	25 Count	2.29 VDC
1791075097	51 Count	751 Count	23 Count	2.17 VDC
1791074196	50 Count	726 Count	23 Count	2.34 VDC
1791073295	48 Count	695 Count	22 Count	2.23 VDC
1791072394	47 Count	667 Count	22 Count	2.21 VDC
1791071494	41 Count	624 Count	17 Count	2.21 VDC
1791070593	40 Count	605 Count	17 Count	2.38 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)