This is the latest recevied telemetry packets stored in our database for station/object M5MOW-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1785844173 | 5 | 821 | 435 | 9 | 0 |
| 1785843992 | 5 | 820 | 435 | 9 | 0 |
| 1785843811 | 4 | 819 | 434 | 10 | 0 |
| 1785843630 | 4 | 817 | 433 | 8 | 0 |
| 1785843449 | 5 | 815 | 433 | 8 | 0 |
| 1785843268 | 5 | 810 | 424 | 8 | 0 |
| 1785843087 | 5 | 810 | 424 | 8 | 0 |
| 1785842906 | 5 | 810 | 425 | 8 | 0 |
| 1785842725 | 5 | 810 | 425 | 9 | 0 |
| 1785842544 | 5 | 813 | 434 | 9 | 0 |
| 1785842363 | 4 | 807 | 425 | 8 | 0 |
| 1785842182 | 5 | 807 | 424 | 8 | 0 |
| 1785842001 | 4 | 808 | 425 | 8 | 0 |
| 1785841820 | 5 | 811 | 434 | 9 | 0 |
| 1785841639 | 4 | 805 | 424 | 8 | 0 |
| 1785841458 | 6 | 805 | 425 | 9 | 0 |
| 1785841277 | 7 | 808 | 434 | 7 | 0 |
| 1785841096 | 6 | 801 | 423 | 9 | 0 |
| 1785840915 | 7 | 800 | 423 | 9 | 0 |
| 1785840734 | 7 | 801 | 424 | 9 | 0 |
| 1785840553 | 6 | 803 | 431 | 8 | 0 |
| 1785840372 | 7 | 798 | 424 | 10 | 0 |
| 1785840191 | 7 | 798 | 423 | 10 | 0 |
| 1785840010 | 7 | 797 | 424 | 10 | 0 |
| 1785839829 | 7 | 797 | 425 | 10 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)