This is the latest recevied telemetry packets stored in our database for station/object EA4ENG-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1780616836 | 274 Count | 63 Count | 62 Count | 3.52 VDC | 0 VDC |
| 1780611414 | 263 Count | 58 Count | 57 Count | 3.54 VDC | 0 VDC |
| 1780595149 | 233 Count | 46 Count | 45 Count | 3.54 VDC | 0 VDC |
| 1780586113 | 223 Count | 46 Count | 45 Count | 3.57 VDC | 0 VDC |
| 1780577076 | 213 Count | 45 Count | 45 Count | 3.55 VDC | 0 VDC |
| 1780571655 | 207 Count | 45 Count | 45 Count | 3.49 VDC | 0 VDC |
| 1780566233 | 201 Count | 45 Count | 45 Count | 3.53 VDC | 0 VDC |
| 1780560811 | 194 Count | 44 Count | 44 Count | 3.54 VDC | 0 VDC |
| 1780557196 | 190 Count | 44 Count | 44 Count | 3.54 VDC | 0 VDC |
| 1780556746 | 189 Count | 44 Count | 44 Count | 3.54 VDC | 0 VDC |
| 1780554939 | 186 Count | 43 Count | 43 Count | 3.54 VDC | 0 VDC |
| 1780553132 | 184 Count | 43 Count | 43 Count | 3.53 VDC | 0 VDC |
| 1780551325 | 182 Count | 43 Count | 43 Count | 3.55 VDC | 0 VDC |
| 1780549518 | 180 Count | 43 Count | 43 Count | 3.55 VDC | 0 VDC |
| 1780547711 | 177 Count | 42 Count | 42 Count | 3.55 VDC | 0 VDC |
| 1780545903 | 172 Count | 39 Count | 39 Count | 3.56 VDC | 0 VDC |
| 1780544095 | 169 Count | 38 Count | 38 Count | 3.56 VDC | 0 VDC |
| 1780542288 | 167 Count | 38 Count | 38 Count | 3.56 VDC | 0 VDC |
| 1780540481 | 163 Count | 36 Count | 36 Count | 3.56 VDC | 0 VDC |
| 1780538674 | 161 Count | 36 Count | 36 Count | 3.54 VDC | 0 VDC |
| 1780536867 | 158 Count | 35 Count | 35 Count | 3.56 VDC | 0 VDC |
| 1780535060 | 153 Count | 32 Count | 32 Count | 3.51 VDC | 0 VDC |
| 1780533252 | 150 Count | 31 Count | 31 Count | 3.56 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)