This is the latest recevied telemetry packets stored in our database for station/object AC7WU-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732729158 | 466 | 608 | 0 | 0 | 0 |
| 1732729056 | 470 | 607 | 0 | 0 | 0 |
| 1732728974 | 468 | 606 | 0 | 0 | 0 |
| 1732728884 | 467 | 604 | 0 | 0 | 0 |
| 1732728671 | 465 | 601 | 0 | 0 | 0 |
| 1732728582 | 466 | 599 | 0 | 0 | 0 |
| 1732728495 | 468 | 598 | 0 | 0 | 0 |
| 1732728396 | 466 | 596 | 0 | 0 | 0 |
| 1732728391 | 465 | 596 | 0 | 0 | 0 |
| 1732728335 | 464 | 594 | 0 | 0 | 0 |
| 1732728330 | 467 | 594 | 0 | 0 | 0 |
| 1732728195 | 465 | 591 | 0 | 0 | 0 |
| 1732728178 | 463 | 590 | 0 | 0 | 0 |
| 1732728073 | 464 | 586 | 0 | 0 | 0 |
| 1732728025 | 463 | 583 | 0 | 0 | 0 |
| 1732727973 | 459 | 581 | 0 | 0 | 0 |
| 1732727455 | 464 | 585 | 0 | 0 | 0 |
| 1732727229 | 465 | 586 | 0 | 0 | 0 |
| 1732727139 | 464 | 583 | 0 | 0 | 0 |
| 1732727131 | 462 | 582 | 0 | 0 | 0 |
| 1732727124 | 461 | 581 | 0 | 0 | 0 |
| 1732727004 | 461 | 575 | 0 | 0 | 0 |
| 1732726996 | 457 | 575 | 0 | 0 | 0 |
| 1732726991 | 461 | 574 | 0 | 0 | 0 |
| 1732726958 | 461 | 572 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)