This is the latest recevied telemetry packets stored in our database for station/object OK2ILA-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1791106272 | 4.19 VDC | 21.7 C | 8223 | 0 | 0 |
| 1791104466 | 4.19 VDC | 19 C | 0 | 0 | 0 |
| 1791103562 | 4.19 VDC | 19.4 C | 8210 | 0 | 0 |
| 1791102659 | 4.19 VDC | 17.4 C | 8213 | 0 | 0 |
| 1791101756 | 4.19 VDC | 12.9 C | 8219 | 0 | 0 |
| 1791100854 | 4.19 VDC | 11.1 C | 8259 | 0 | 0 |
| 1791099950 | 4.19 VDC | 10.5 C | 8262 | 0 | 0 |
| 1791099047 | 4.19 VDC | 10.1 C | 8247 | 0 | 0 |
| 1791098144 | 4.19 VDC | 9.6 C | 8231 | 0 | 0 |
| 1791096333 | 4.19 VDC | 8.9 C | 8255 | 0 | 0 |
| 1791095430 | 4.19 VDC | 8.6 C | 8225 | 0 | 0 |
| 1791094527 | 4.19 VDC | 8.4 C | 8234 | 0 | 0 |
| 1791093624 | 4.19 VDC | 8.3 C | 8249 | 0 | 0 |
| 1791092721 | 4.19 VDC | 8.2 C | 8238 | 0 | 0 |
| 1791091818 | 4.14 VDC | 8.2 C | 8231 | 0 | 0 |
| 1791090915 | 4.14 VDC | 8.2 C | 8231 | 0 | 0 |
| 1791090012 | 4.14 VDC | 8.2 C | 8224 | 0 | 0 |
| 1791089109 | 4.14 VDC | 8.3 C | 8205 | 0 | 0 |
| 1791088297 | 4.15 VDC | 8.3 C | 8247 | 0 | 0 |
| 1791087394 | 4.15 VDC | 8.4 C | 8236 | 0 | 0 |
| 1791086491 | 4.15 VDC | 8.5 C | 8263 | 0 | 0 |
| 1791085588 | 4.16 VDC | 8.5 C | 0 | 0 | 0 |
| 1791084685 | 4.16 VDC | 8.6 C | 8246 | 0 | 0 |
| 1791084568 | 4.16 VDC | 8.6 C | 8258 | 0 | 0 |
| 1791084408 | 4.16 VDC | 8.6 C | 8241 | 0 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)