This is the latest recevied telemetry packets stored in our database for station/object SV6AYW-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1785863480 | 26.3 | 55.92 | 1025.88 | 0 | 0 |
| 1785862576 | 26.3 | 56.95 | 1024.25 | 0 | 0 |
| 1785861672 | 26.1 | 57.49 | 1024.75 | 0 | 0 |
| 1785860768 | 26.5 | 57.49 | 1025.5 | 0 | 0 |
| 1785859864 | 26.3 | 56.9 | 1026.13 | 0 | 0 |
| 1785858960 | 23.8 | 62.66 | 1025.25 | 0 | 0 |
| 1785858056 | 23.3 | 66.26 | 1026.25 | 0 | 0 |
| 1785857152 | 24.9 | 60.81 | 1025.5 | 0 | 0 |
| 1785856248 | 25.7 | 57.19 | 1025.5 | 0 | 0 |
| 1785855344 | 27 | 52.85 | 1026.25 | 0 | 0 |
| 1785854440 | 27.3 | 49.06 | 1026 | 0 | 0 |
| 1785853536 | 27 | 50.03 | 1025.38 | 0 | 0 |
| 1785852632 | 27 | 51.14 | 1027.13 | 0 | 0 |
| 1785851728 | 27.2 | 50.45 | 1025 | 0 | 0 |
| 1785850824 | 28.5 | 45.98 | 1025.88 | 0 | 0 |
| 1785849920 | 28.6 | 44.53 | 1024.75 | 0 | 0 |
| 1785848112 | 29 | 40.64 | 1023.5 | 0 | 0 |
| 1785847208 | 29.3 | 41.79 | 1023.63 | 0 | 0 |
| 1785846304 | 29.3 | 40.22 | 1023.75 | 0 | 0 |
| 1785845400 | 29.3 | 37.15 | 1024 | 0 | 0 |
| 1785844496 | 29.4 | 36.47 | 1023.13 | 0 | 0 |
| 1785843592 | 29.3 | 38.05 | 1024.13 | 0 | 0 |
| 1785842688 | 29 | 39.64 | 1024.25 | 0 | 0 |
| 1785841784 | 29.2 | 38.65 | 1025.25 | 0 | 0 |
| 1785840880 | 29.1 | 38.66 | 1024.25 | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)