This is the latest recevied telemetry packets stored in our database for station/object SP2HCA-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791141316 | 20 Count | 254 Count | 12 Count | 3.98 VDC | 0.08 VDC |
| 1791139814 | 16 Count | 186 Count | 9 Count | 3.98 VDC | 0.08 VDC |
| 1791138313 | 11 Count | 114 Count | 5 Count | 3.98 VDC | 0.08 VDC |
| 1791136812 | 7 Count | 46 Count | 2 Count | 3.99 VDC | 0.08 VDC |
| 1791135310 | 3 Count | 1 Count | 0 Count | 3.99 VDC | 0.08 VDC |
| 1791134730 | 56 Count | 976 Count | 37 Count | 3.99 VDC | 0.08 VDC |
| 1791133228 | 53 Count | 919 Count | 35 Count | 3.99 VDC | 0.08 VDC |
| 1791131727 | 50 Count | 852 Count | 33 Count | 3.99 VDC | 0.08 VDC |
| 1791130226 | 47 Count | 784 Count | 31 Count | 4 VDC | 0.08 VDC |
| 1791128724 | 44 Count | 731 Count | 29 Count | 4 VDC | 0.08 VDC |
| 1791127223 | 41 Count | 669 Count | 27 Count | 4 VDC | 0.08 VDC |
| 1791125720 | 37 Count | 615 Count | 24 Count | 4 VDC | 0.08 VDC |
| 1791124219 | 34 Count | 568 Count | 22 Count | 4 VDC | 0.08 VDC |
| 1791122718 | 31 Count | 502 Count | 20 Count | 4 VDC | 0.08 VDC |
| 1791121216 | 26 Count | 379 Count | 16 Count | 4 VDC | 0.08 VDC |
| 1791118213 | 19 Count | 196 Count | 11 Count | 4 VDC | 0.08 VDC |
| 1791116712 | 15 Count | 142 Count | 8 Count | 4 VDC | 0.08 VDC |
| 1791113709 | 8 Count | 59 Count | 4 Count | 4.01 VDC | 0.08 VDC |
| 1791113131 | 2 Count | 41 Count | 2 Count | 4.01 VDC | 0.08 VDC |
| 1791111628 | 71 Count | 1006 Count | 47 Count | 4.01 VDC | 0.08 VDC |
| 1791110127 | 68 Count | 968 Count | 45 Count | 4 VDC | 0.08 VDC |
| 1791108625 | 62 Count | 906 Count | 40 Count | 4 VDC | 0.08 VDC |
| 1791107124 | 58 Count | 849 Count | 37 Count | 4.01 VDC | 0.08 VDC |
| 1791105622 | 57 Count | 792 Count | 37 Count | 4 VDC | 0.08 VDC |
| 1791104121 | 55 Count | 728 Count | 36 Count | 4 VDC | 0.08 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)