This is the latest recevied telemetry packets stored in our database for station/object KI5QHC-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1740163490 | 462 | 607 | 0 | 0 | 0 |
| 1740163453 | 462 | 606 | 0 | 0 | 0 |
| 1740162857 | 463 | 587 | 0 | 0 | 0 |
| 1740162531 | 462 | 582 | 0 | 0 | 0 |
| 1740161709 | 460 | 582 | 0 | 0 | 0 |
| 1740161640 | 462 | 582 | 0 | 0 | 0 |
| 1740161514 | 463 | 583 | 0 | 0 | 0 |
| 1740161159 | 492 | 582 | 0 | 0 | 0 |
| 1740157573 | 428 | 581 | 0 | 0 | 0 |
| 1740155780 | 428 | 579 | 0 | 0 | 0 |
| 1740153988 | 428 | 577 | 0 | 0 | 0 |
| 1740152196 | 428 | 576 | 0 | 0 | 0 |
| 1740150403 | 429 | 575 | 0 | 0 | 0 |
| 1740148611 | 431 | 575 | 0 | 0 | 0 |
| 1740146819 | 429 | 574 | 0 | 0 | 0 |
| 1740143234 | 430 | 575 | 0 | 0 | 0 |
| 1740141442 | 431 | 578 | 0 | 0 | 0 |
| 1740139649 | 431 | 579 | 0 | 0 | 0 |
| 1740137856 | 433 | 585 | 0 | 0 | 0 |
| 1740136064 | 432 | 586 | 0 | 0 | 0 |
| 1740134272 | 436 | 590 | 0 | 0 | 0 |
| 1740130687 | 433 | 593 | 0 | 0 | 0 |
| 1740128894 | 434 | 596 | 0 | 0 | 0 |
| 1740125308 | 435 | 606 | 0 | 0 | 0 |
| 1740121720 | 435 | 617 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)