This is the latest recevied telemetry packets stored in our database for station/object 9M4RSA-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1769700270 | 417 | 0 | 0 | 0 | 0 |
| 1769699369 | 417 | 0 | 0 | 0 | 0 |
| 1769698469 | 417 | 0 | 0 | 0 | 0 |
| 1769697569 | 417 | 0 | 0 | 0 | 0 |
| 1769696669 | 417 | 0 | 0 | 0 | 0 |
| 1769695769 | 417 | 0 | 0 | 0 | 0 |
| 1769694869 | 417 | 0 | 0 | 0 | 0 |
| 1769693969 | 417 | 0 | 0 | 0 | 0 |
| 1769693069 | 417 | 0 | 0 | 0 | 0 |
| 1769692169 | 417 | 0 | 0 | 0 | 0 |
| 1769691268 | 417 | 0 | 0 | 0 | 0 |
| 1769690368 | 417 | 0 | 0 | 0 | 0 |
| 1769689468 | 417 | 0 | 0 | 0 | 0 |
| 1769688568 | 417 | 0 | 0 | 0 | 0 |
| 1769687668 | 417 | 0 | 0 | 0 | 0 |
| 1769686768 | 418 | 0 | 0 | 0 | 0 |
| 1769685868 | 417 | 0 | 0 | 0 | 0 |
| 1769684968 | 417 | 0 | 0 | 0 | 0 |
| 1769684067 | 417 | 0 | 0 | 0 | 0 |
| 1769683167 | 417 | 0 | 0 | 0 | 0 |
| 1769682270 | 417 | 0 | 0 | 0 | 0 |
| 1769681369 | 417 | 0 | 0 | 0 | 0 |
| 1769680469 | 418 | 0 | 0 | 0 | 0 |
| 1769676869 | 419 | 0 | 0 | 0 | 0 |
| 1769675968 | 418 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)