This is the latest recevied telemetry packets stored in our database for station/object SA3MHZ-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1780572270 | 36.3 C | 22.23 % | 0 | 0 | 0 |
| 1780571912 | 37.5 C | 22.19 % | 0 | 0 | 0 |
| 1780571559 | 38.9 C | 21.94 % | 0 | 0 | 0 |
| 1780571107 | 40.2 C | 22.11 % | 0 | 0 | 0 |
| 1780567776 | 33.6 C | 28.09 % | 0 | 0 | 0 |
| 1780567325 | 32.2 C | 30.97 % | 0 | 0 | 0 |
| 1780566980 | 30.8 C | 33.18 % | 0 | 0 | 0 |
| 1780566648 | 28.9 C | 35.45 % | 0 | 0 | 0 |
| 1780566142 | 23.7 C | 42.36 % | 0 | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)