This is the latest recevied telemetry packets stored in our database for station/object VK2GJ-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vbat* | Vsol* | Psys* | Temp* | AirP* |
|---|---|---|---|---|---|
| 1732553335 | 3.99 V | 1.43 V | 92 mW | 25.5 degC | 99587.5 Pa |
| 1732551498 | 3.99 V | 1.43 V | 86 mW | 25.4 degC | 99612.5 Pa |
| 1732549683 | 3.94 V | 1.42 V | 230 mW | 25.3 degC | 99637.5 Pa |
| 1732546030 | 3.99 V | 1.43 V | 128 mW | 26.1 degC | 99662.5 Pa |
| 1732540533 | 3.99 V | 1.43 V | 132 mW | 27.5 degC | 99725 Pa |
| 1732489460 | 4.06 V | 1.45 V | 28 mW | 26.3 degC | 99950 Pa |
| 1732487643 | 3.99 V | 1.43 V | 88 mW | 26.4 degC | 99962.5 Pa |
| 1732482152 | 4.06 V | 1.45 V | 68 mW | 24.7 degC | 100012.5 Pa |
| 1732480335 | 3.99 V | 1.43 V | 86 mW | 24.6 degC | 99975 Pa |
| 1732476688 | 3.99 V | 1.43 V | 86 mW | 24.5 degC | 99937.5 Pa |
| 1732474852 | 3.99 V | 1.43 V | 86 mW | 24.6 degC | 99925 Pa |
| 1732473037 | 3.99 V | 1.43 V | 86 mW | 24.6 degC | 99900 Pa |
| 1732471201 | 3.99 V | 1.43 V | 86 mW | 24.8 degC | 99900 Pa |
| 1732467544 | 3.94 V | 1.42 V | 194 mW | 25.3 degC | 99875 Pa |
*Used Equation Coefficients:
Vbat: 0, 0.001, 0
Vsol: 0, 0.001, 0
Psys: 0, 2, 0
Temp: 0, 0.1, -100
AirP: 0, 12.5, 500
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)