APRS Track Direct

My position About ☰

reset

EA4AOJ-9 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EA4AOJ-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Pressure*	Satellite*	HDOP*
1769674029	21 °C	928 hPa	8 Sat	1 HDOP
1769674017	21 °C	928 hPa	10 Sat	0 HDOP
1769674008	21 °C	928 hPa	10 Sat	0 HDOP
1769673873	20 °C	928 hPa	10 Sat	0 HDOP
1769673733	19 °C	929 hPa	10 Sat	1 HDOP
1769673725	19 °C	929 hPa	9 Sat	1 HDOP
1769673703	19 °C	929 hPa	10 Sat	0 HDOP
1769673695	19 °C	930 hPa	10 Sat	1 HDOP
1769673678	19 °C	930 hPa	10 Sat	0 HDOP
1769673663	18 °C	930 hPa	10 Sat	0 HDOP
1769673629	18 °C	930 hPa	10 Sat	0 HDOP
1769673503	17 °C	929 hPa	10 Sat	0 HDOP
1769673474	16 °C	928 hPa	10 Sat	0 HDOP
1769673449	16 °C	928 hPa	10 Sat	0 HDOP
1769673377	15 °C	926 hPa	11 Sat	0 HDOP
1769673369	15 °C	926 hPa	11 Sat	1 HDOP
1769673346	15 °C	926 hPa	11 Sat	0 HDOP
1769672914	9 °C	926 hPa	11 Sat	0 HDOP
1769672766	7 °C	928 hPa	10 Sat	1 HDOP
1769672715	6 °C	929 hPa	10 Sat	1 HDOP
1769672681	6 °C	929 hPa	10 Sat	1 HDOP
1769672648	5 °C	929 hPa	10 Sat	1 HDOP
1769672600	5 °C	929 hPa	10 Sat	1 HDOP
1769672587	4 °C	929 hPa	10 Sat	1 HDOP
1769672575	4 °C	929 hPa	10 Sat	1 HDOP

*Used Equation Coefficients:

Temp: 0, 1, 0

Pressure: 0, 1, 0

Satellite: 0, 1, 0

HDOP: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)