This is the latest recevied telemetry packets stored in our database for station/object BH3DEL-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Sate* | Temp* | Volt* | Alt* | A* |
---|---|---|---|---|---|
1732815263 | 5 | 26 C | 3.7 V | 90 M | 0 |
1732814901 | 5 | 26 C | 3.71 V | 150 M | 0 |
1732814537 | 5 | 26 C | 3.71 V | 80 M | 0 |
1732814173 | 5 | 26 C | 3.71 V | 110 M | 0 |
1732813809 | 5 | 25.5 C | 3.71 V | 90 M | 0 |
1732813447 | 4 | 25.5 C | 3.71 V | 80 M | 0 |
1732813082 | 6 | 24.5 C | 3.72 V | 90 M | 0 |
*Used Equation Coefficients:
Sate: 0, 1, 0
Temp: 0, 0.1, -50
Volt: 0, 0.01, 0
Alt: 0, 10, 0
A: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)