This is the latest recevied telemetry packets stored in our database for station/object KF4TJY-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1780613405 | 436 | 635 | 0 | 0 | 0 |
| 1780613378 | 438 | 635 | 0 | 0 | 0 |
| 1780613354 | 433 | 635 | 0 | 0 | 0 |
| 1780613335 | 440 | 635 | 0 | 0 | 0 |
| 1780613220 | 437 | 635 | 0 | 0 | 0 |
| 1780613176 | 431 | 635 | 0 | 0 | 0 |
| 1780613058 | 439 | 636 | 0 | 0 | 0 |
| 1780612986 | 438 | 636 | 0 | 0 | 0 |
| 1780612859 | 438 | 636 | 0 | 0 | 0 |
| 1780612832 | 439 | 636 | 0 | 0 | 0 |
| 1780612739 | 439 | 636 | 0 | 0 | 0 |
| 1780612728 | 438 | 636 | 0 | 0 | 0 |
| 1780612611 | 440 | 637 | 0 | 0 | 0 |
| 1780612510 | 438 | 637 | 0 | 0 | 0 |
| 1780612484 | 439 | 636 | 0 | 0 | 0 |
| 1780612481 | 438 | 637 | 0 | 0 | 0 |
| 1780612224 | 438 | 636 | 0 | 0 | 0 |
| 1780612200 | 436 | 635 | 0 | 0 | 0 |
| 1780612041 | 439 | 634 | 0 | 0 | 0 |
| 1780611872 | 436 | 631 | 0 | 0 | 0 |
| 1780611863 | 437 | 631 | 0 | 0 | 0 |
| 1780611804 | 438 | 630 | 0 | 0 | 0 |
| 1780608255 | 435 | 634 | 0 | 0 | 0 |
| 1780608136 | 436 | 635 | 0 | 0 | 0 |
| 1780608059 | 431 | 634 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)