This is the latest recevied telemetry packets stored in our database for station/object KD5FCQ-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1785848597 | 14.01 Volts | 104.41 Deg.F | 0 | 0 | 0 |
| 1785848477 | 14.01 Volts | 104.41 Deg.F | 0 | 0 | 0 |
| 1785848359 | 14.01 Volts | 104.41 Deg.F | 0 | 0 | 0 |
| 1785848238 | 14.01 Volts | 104.41 Deg.F | 0 | 0 | 0 |
| 1785847879 | 14.03 Volts | 104.41 Deg.F | 0 | 0 | 0 |
| 1785847521 | 14.01 Volts | 103.53 Deg.F | 0 | 0 | 0 |
| 1785847401 | 14.03 Volts | 102.65 Deg.F | 0 | 0 | 0 |
| 1785847166 | 14.01 Volts | 102.65 Deg.F | 0 | 0 | 0 |
| 1785847162 | 14.03 Volts | 102.65 Deg.F | 0 | 0 | 0 |
| 1785847042 | 14.01 Volts | 102.65 Deg.F | 0 | 0 | 0 |
| 1785846803 | 14.03 Volts | 101.77 Deg.F | 0 | 0 | 0 |
| 1785846564 | 14.03 Volts | 100.89 Deg.F | 0 | 0 | 0 |
| 1785846444 | 14.03 Volts | 100.89 Deg.F | 0 | 0 | 0 |
| 1785846086 | 14.03 Volts | 98.25 Deg.F | 0 | 0 | 0 |
| 1785845966 | 14.01 Volts | 97.37 Deg.F | 0 | 0 | 0 |
| 1785845727 | 14.01 Volts | 93.85 Deg.F | 0 | 0 | 0 |
| 1785845608 | 14.01 Volts | 91.21 Deg.F | 0 | 0 | 0 |
| 1785845488 | 13.6 Volts | 88.57 Deg.F | 0 | 0 | 0 |
| 1785794661 | 13.8 Volts | 125.53 Deg.F | 0 | 0 | 0 |
| 1785794541 | 13.8 Volts | 125.53 Deg.F | 0 | 0 | 0 |
| 1785794421 | 13.8 Volts | 126.41 Deg.F | 0 | 0 | 0 |
| 1785794302 | 13.8 Volts | 127.29 Deg.F | 0 | 0 | 0 |
| 1785794182 | 13.8 Volts | 127.29 Deg.F | 0 | 0 | 0 |
| 1785794062 | 13.8 Volts | 128.17 Deg.F | 0 | 0 | 0 |
| 1785793222 | 13.86 Volts | 133.45 Deg.F | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.0293, 0
Temp: 0, 0.88, -459.67
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)