This is the latest recevied telemetry packets stored in our database for station/object KD4TXF-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732752679 | 475 | 611 | 0 | 0 | 0 |
| 1732752669 | 474 | 611 | 0 | 0 | 0 |
| 1732752340 | 474 | 611 | 0 | 0 | 0 |
| 1732752172 | 473 | 611 | 0 | 0 | 0 |
| 1732751848 | 474 | 611 | 0 | 0 | 0 |
| 1732751120 | 473 | 613 | 0 | 0 | 0 |
| 1732750770 | 473 | 622 | 0 | 0 | 0 |
| 1732750440 | 472 | 632 | 0 | 0 | 0 |
| 1732750198 | 471 | 623 | 0 | 0 | 0 |
| 1732749595 | 474 | 610 | 0 | 0 | 0 |
| 1732748683 | 475 | 619 | 0 | 0 | 0 |
| 1732748345 | 475 | 630 | 0 | 0 | 0 |
| 1732748117 | 412 | 618 | 0 | 0 | 0 |
| 1732747187 | 478 | 605 | 0 | 0 | 0 |
| 1732741074 | 477 | 611 | 0 | 0 | 0 |
| 1732739625 | 479 | 610 | 0 | 0 | 0 |
| 1732739186 | 478 | 609 | 0 | 0 | 0 |
| 1732738673 | 479 | 609 | 0 | 0 | 0 |
| 1732737259 | 478 | 608 | 0 | 0 | 0 |
| 1732736868 | 476 | 609 | 0 | 0 | 0 |
| 1732732468 | 442 | 642 | 0 | 0 | 0 |
| 1732728685 | 483 | 603 | 0 | 0 | 0 |
| 1732728530 | 483 | 602 | 0 | 0 | 0 |
| 1732728389 | 481 | 602 | 0 | 0 | 0 |
| 1732728260 | 483 | 601 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)