This is the latest recevied telemetry packets stored in our database for station/object KC3ARY. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery Voltage* | Battery Current* | Load Current* | Solar Voltage* | Solar Current* |
|---|---|---|---|---|---|
| 1791093501 | 11.14 V | 278 mA | -250 mA | 0 V | 0 mA |
| 1791092899 | 11.14 V | 279 mA | -251 mA | 0 V | 0 mA |
| 1791092300 | 11.14 V | 279 mA | -252 mA | 0 V | 0 mA |
| 1791091700 | 11.15 V | 278 mA | -250 mA | 0 V | 0 mA |
| 1791091100 | 11.15 V | 278 mA | -250 mA | 0 V | 0 mA |
| 1791090500 | 11.15 V | 279 mA | -250 mA | 0 V | 0 mA |
| 1791089900 | 11.16 V | 279 mA | -251 mA | 0 V | 0 mA |
| 1791089298 | 11.16 V | 281 mA | -253 mA | 0 V | 0 mA |
| 1791088710 | 11.16 V | 283 mA | -254 mA | 0 V | 0 mA |
| 1791087500 | 11.17 V | 281 mA | -251 mA | 0 V | 0 mA |
| 1791086900 | 11.18 V | 284 mA | -250 mA | 0 V | 0 mA |
| 1791086300 | 11.18 V | 280 mA | -251 mA | 0 V | 0 mA |
| 1791085698 | 11.18 V | 281 mA | -253 mA | 0 V | 0 mA |
| 1791084500 | 11.19 V | 280 mA | -254 mA | 0 V | 0 mA |
| 1791083900 | 11.2 V | 282 mA | -253 mA | 0 V | 0 mA |
| 1791083300 | 11.2 V | 280 mA | -252 mA | 0 V | 0 mA |
| 1791082700 | 11.21 V | 283 mA | -254 mA | 0 V | 0 mA |
| 1791082098 | 11.21 V | 286 mA | -255 mA | 0 V | 0 mA |
| 1791081500 | 11.22 V | 287 mA | -258 mA | 0 V | 0 mA |
| 1791080900 | 11.22 V | 290 mA | -260 mA | 0 V | 0 mA |
| 1791080300 | 11.23 V | 291 mA | -265 mA | 0 V | 0 mA |
| 1791079720 | 11.23 V | 299 mA | -272 mA | 0 V | 0 mA |
| 1791079122 | 11.23 V | 305 mA | -276 mA | 0 V | 0 mA |
| 1791078500 | 11.24 V | 289 mA | -261 mA | 0 V | 0 mA |
| 1791077921 | 11.25 V | 288 mA | -261 mA | 0 V | 0 mA |
*Used Equation Coefficients:
Battery Voltage: 0, 0.01, 0
Battery Current: 0, 1, -4096
Load Current: 0, 1, -4096
Solar Voltage: 0, 0.01, 0
Solar Current: 0, 1, -4096
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)