This is the latest recevied telemetry packets stored in our database for station/object SP9XWW-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1782132893 | 12 | 879 | 423 | 20 | 0 |
| 1782131680 | 12 | 897 | 423 | 19 | 0 |
| 1782124867 | 12 | 846 | 422 | 19 | 0 |
| 1782123491 | 12 | 884 | 422 | 20 | 0 |
| 1782118251 | 12 | 992 | 419 | 20 | 0 |
| 1782116983 | 12 | 986 | 421 | 20 | 0 |
| 1782115456 | 12 | 962 | 423 | 20 | 0 |
| 1782114239 | 12 | 948 | 423 | 19 | 0 |
| 1782112687 | 12 | 899 | 419 | 20 | 0 |
| 1782109168 | 12 | 804 | 421 | 19 | 0 |
| 1782106463 | 12 | 780 | 422 | 20 | 0 |
| 1782105250 | 12 | 762 | 423 | 21 | 0 |
| 1782103845 | 12 | 755 | 423 | 20 | 0 |
| 1782101696 | 12 | 733 | 423 | 20 | 0 |
| 1782099301 | 12 | 716 | 423 | 20 | 0 |
| 1782096632 | 12 | 710 | 420 | 20 | 0 |
| 1782094337 | 12 | 712 | 424 | 20 | 0 |
| 1782091706 | 12 | 713 | 422 | 20 | 0 |
| 1782089570 | 12 | 721 | 424 | 19 | 0 |
| 1782087883 | 12 | 719 | 424 | 19 | 0 |
| 1782085492 | 12 | 729 | 424 | 20 | 0 |
| 1782081333 | 12 | 736 | 424 | 20 | 0 |
| 1782079372 | 12 | 745 | 422 | 20 | 0 |
| 1782077625 | 12 | 748 | 423 | 20 | 0 |
| 1782074190 | 12 | 758 | 423 | 20 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)