This is the latest recevied telemetry packets stored in our database for station/object WA9TT-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732491705 | 467 | 586 | 0 | 0 | 0 |
| 1732491693 | 468 | 586 | 0 | 0 | 0 |
| 1732491591 | 467 | 584 | 0 | 0 | 0 |
| 1732491501 | 468 | 581 | 0 | 0 | 0 |
| 1732491490 | 467 | 580 | 0 | 0 | 0 |
| 1732491467 | 469 | 579 | 0 | 0 | 0 |
| 1732491463 | 466 | 578 | 0 | 0 | 0 |
| 1732491458 | 467 | 578 | 0 | 0 | 0 |
| 1732491448 | 469 | 577 | 0 | 0 | 0 |
| 1732490295 | 401 | 582 | 0 | 0 | 0 |
| 1732490268 | 401 | 582 | 0 | 0 | 0 |
| 1732490263 | 401 | 581 | 0 | 0 | 0 |
| 1732490258 | 402 | 581 | 0 | 0 | 0 |
| 1732490225 | 401 | 581 | 0 | 0 | 0 |
| 1732490133 | 400 | 580 | 0 | 0 | 0 |
| 1732490112 | 401 | 578 | 0 | 0 | 0 |
| 1732490106 | 401 | 578 | 0 | 0 | 0 |
| 1732490038 | 401 | 578 | 0 | 0 | 0 |
| 1732490033 | 401 | 578 | 0 | 0 | 0 |
| 1732489983 | 402 | 576 | 0 | 0 | 0 |
| 1732469319 | 402 | 601 | 0 | 0 | 0 |
| 1732469243 | 401 | 600 | 0 | 0 | 0 |
| 1732469235 | 402 | 600 | 0 | 0 | 0 |
| 1732469128 | 403 | 599 | 0 | 0 | 0 |
| 1732469123 | 402 | 599 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)