This is the latest recevied telemetry packets stored in our database for station/object NA7CA-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732491802 | 461 | 621 | 0 | 0 | 0 |
| 1732490778 | 418 | 624 | 0 | 0 | 0 |
| 1732490658 | 418 | 623 | 0 | 0 | 0 |
| 1732490539 | 419 | 623 | 0 | 0 | 0 |
| 1732490420 | 418 | 623 | 0 | 0 | 0 |
| 1732488674 | 463 | 622 | 0 | 0 | 0 |
| 1732487634 | 418 | 618 | 0 | 0 | 0 |
| 1732487514 | 420 | 617 | 0 | 0 | 0 |
| 1732487395 | 419 | 617 | 0 | 0 | 0 |
| 1732487156 | 425 | 615 | 0 | 0 | 0 |
| 1732479026 | 415 | 621 | 0 | 0 | 0 |
| 1732478906 | 407 | 621 | 0 | 0 | 0 |
| 1732478784 | 411 | 621 | 0 | 0 | 0 |
| 1732478665 | 410 | 621 | 0 | 0 | 0 |
| 1732478545 | 468 | 621 | 0 | 0 | 0 |
| 1732478426 | 465 | 619 | 0 | 0 | 0 |
| 1732478187 | 455 | 618 | 0 | 0 | 0 |
| 1732478067 | 399 | 618 | 0 | 0 | 0 |
| 1732477948 | 418 | 618 | 0 | 0 | 0 |
| 1732477491 | 419 | 617 | 0 | 0 | 0 |
| 1732477252 | 417 | 617 | 0 | 0 | 0 |
| 1732477132 | 418 | 616 | 0 | 0 | 0 |
| 1732476869 | 418 | 616 | 0 | 0 | 0 |
| 1732476630 | 419 | 615 | 0 | 0 | 0 |
| 1732476033 | 477 | 613 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)