This is the latest recevied telemetry packets stored in our database for station/object KF5ZMD-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1769623038 | 471 | 626 | 0 | 0 | 0 |
| 1769622949 | 470 | 626 | 0 | 0 | 0 |
| 1769622860 | 470 | 625 | 0 | 0 | 0 |
| 1769621845 | 448 | 617 | 0 | 0 | 0 |
| 1769621725 | 448 | 615 | 0 | 0 | 0 |
| 1769621697 | 446 | 615 | 0 | 0 | 0 |
| 1769621666 | 451 | 615 | 0 | 0 | 0 |
| 1769621636 | 451 | 614 | 0 | 0 | 0 |
| 1769621607 | 447 | 614 | 0 | 0 | 0 |
| 1769621576 | 450 | 613 | 0 | 0 | 0 |
| 1769621546 | 449 | 612 | 0 | 0 | 0 |
| 1769621517 | 448 | 612 | 0 | 0 | 0 |
| 1769621487 | 445 | 611 | 0 | 0 | 0 |
| 1769621427 | 441 | 610 | 0 | 0 | 0 |
| 1769621398 | 442 | 609 | 0 | 0 | 0 |
| 1769621189 | 469 | 603 | 0 | 0 | 0 |
| 1769621100 | 469 | 601 | 0 | 0 | 0 |
| 1769620742 | 466 | 590 | 0 | 0 | 0 |
| 1769620682 | 468 | 589 | 0 | 0 | 0 |
| 1769620652 | 472 | 587 | 0 | 0 | 0 |
| 1769620623 | 467 | 586 | 0 | 0 | 0 |
| 1769620593 | 468 | 586 | 0 | 0 | 0 |
| 1769620563 | 466 | 585 | 0 | 0 | 0 |
| 1769620533 | 476 | 584 | 0 | 0 | 0 |
| 1769620504 | 484 | 583 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)