APRS Track Direct

My position About ☰

reset

VE7EOL-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VE7EOL-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Battery*	Temp*
1780614404	13.33 Volts	39.32 Deg.C
1780614373	13.86 Volts	38.83 Deg.C
1780614328	13.74 Volts	38.34 Deg.C
1780614268	13.54 Volts	36.88 Deg.C
1780614263	13.45 Volts	36.88 Deg.C
1780614211	13.54 Volts	36.39 Deg.C
1780614206	13.36 Volts	35.9 Deg.C
1780614158	12.66 Volts	35.41 Deg.C
1780614133	13.54 Volts	35.41 Deg.C
1780614113	13.51 Volts	34.92 Deg.C
1780614108	13.71 Volts	35.41 Deg.C
1780614101	13.86 Volts	35.41 Deg.C
1780613898	14.06 Volts	33.45 Deg.C
1780613890	14.27 Volts	33.45 Deg.C
1780613882	13.62 Volts	33.45 Deg.C
1780613878	14.06 Volts	32.96 Deg.C
1780613864	13.68 Volts	32.96 Deg.C
1780613854	13.57 Volts	32.96 Deg.C
1780613842	13.77 Volts	32.96 Deg.C
1780613839	13.39 Volts	32.48 Deg.C
1780613822	13.83 Volts	32.48 Deg.C
1780613818	13.86 Volts	32.48 Deg.C
1780611991	13.51 Volts	30.03 Deg.C
1780611914	14.09 Volts	29.05 Deg.C
1780611862	13.92 Volts	28.07 Deg.C

*Used Equation Coefficients:

Battery: 0, 0.0293, 0

Temp: 0, 0.489, -273.15

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)