This is the latest recevied telemetry packets stored in our database for station/object KE0AIR. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1740185048 | 479 | 594 | 0 | 0 | 0 |
| 1740184929 | 479 | 593 | 0 | 0 | 0 |
| 1740184691 | 479 | 589 | 0 | 0 | 0 |
| 1740184451 | 479 | 584 | 0 | 0 | 0 |
| 1740156364 | 481 | 610 | 0 | 0 | 0 |
| 1740156245 | 484 | 609 | 0 | 0 | 0 |
| 1740156006 | 430 | 607 | 0 | 0 | 0 |
| 1740155886 | 439 | 606 | 0 | 0 | 0 |
| 1740155767 | 449 | 605 | 0 | 0 | 0 |
| 1740155627 | 480 | 604 | 0 | 0 | 0 |
| 1740155507 | 482 | 603 | 0 | 0 | 0 |
| 1740155388 | 482 | 601 | 0 | 0 | 0 |
| 1740155268 | 478 | 598 | 0 | 0 | 0 |
| 1740154910 | 479 | 591 | 0 | 0 | 0 |
| 1740154791 | 482 | 590 | 0 | 0 | 0 |
| 1740154551 | 481 | 588 | 0 | 0 | 0 |
| 1740154432 | 480 | 587 | 0 | 0 | 0 |
| 1740154312 | 482 | 585 | 0 | 0 | 0 |
| 1740154193 | 482 | 583 | 0 | 0 | 0 |
| 1740154074 | 480 | 581 | 0 | 0 | 0 |
| 1740153954 | 483 | 579 | 0 | 0 | 0 |
| 1740153836 | 484 | 576 | 0 | 0 | 0 |
| 1740113837 | 483 | 628 | 0 | 0 | 0 |
| 1740113597 | 483 | 625 | 0 | 0 | 0 |
| 1740113356 | 483 | 621 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)