This is the latest recevied telemetry packets stored in our database for station/object 2E0ONV-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Sate* | Temp* | Volt* | Alt* | A5* |
|---|---|---|---|---|---|
| 1775213094 | 12 | 81.5 F | 4.11 V | 20 M | 0 |
| 1775210094 | 12 | 73.7 F | 4.13 V | 30 M | 0 |
| 1775207094 | 11 | 70.8 F | 4.14 V | 20 M | 0 |
| 1775204094 | 11 | 64 F | 4.13 V | 30 M | 0 |
| 1775198094 | 12 | 58.2 F | 4.13 V | 20 M | 0 |
| 1775195094 | 12 | 57.5 F | 4.13 V | 40 M | 0 |
| 1775192094 | 12 | 57.2 F | 4.12 V | 20 M | 0 |
| 1775189094 | 12 | 56.8 F | 4.13 V | 40 M | 0 |
| 1775186094 | 12 | 56.1 F | 4.12 V | 30 M | 0 |
| 1775180094 | 12 | 55 F | 4.12 V | 20 M | 0 |
| 1775177094 | 12 | 54.8 F | 4.12 V | 20 M | 0 |
| 1775174094 | 11 | 55.4 F | 4.12 V | 20 M | 0 |
| 1775171094 | 12 | 55.9 F | 4.12 V | 30 M | 0 |
| 1775168094 | 12 | 56.4 F | 4.13 V | 20 M | 0 |
| 1775165094 | 8 | 57 F | 4.12 V | 30 M | 0 |
| 1775159094 | 12 | 59 F | 4.13 V | 30 M | 0 |
*Used Equation Coefficients:
Sate: 0, 1, 0
Temp: 0, 0.1, -50
Volt: 0, 0.01, 0
Alt: 0, 10, 0
A5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)