This is the latest recevied telemetry packets stored in our database for station/object 9W2TWC-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1769614559 | 4.13 VDC | 0 | 0 | 0 | 0 |
| 1769613856 | 4.04 VDC | 0 | 0 | 0 | 0 |
| 1769612691 | 3.97 VDC | 0 | 0 | 0 | 0 |
| 1769612657 | 3.97 VDC | 0 | 0 | 0 | 0 |
| 1769612561 | 3.95 VDC | 0 | 0 | 0 | 0 |
| 1769612516 | 3.96 VDC | 0 | 0 | 0 | 0 |
| 1769612459 | 3.96 VDC | 0 | 0 | 0 | 0 |
| 1769612433 | 3.95 VDC | 0 | 0 | 0 | 0 |
| 1769612179 | 3.94 VDC | 0 | 0 | 0 | 0 |
| 1769611862 | 3.92 VDC | 0 | 0 | 0 | 0 |
| 1769611809 | 3.92 VDC | 0 | 0 | 0 | 0 |
| 1769611766 | 3.92 VDC | 0 | 0 | 0 | 0 |
| 1769611631 | 3.91 VDC | 0 | 0 | 0 | 0 |
| 1769611615 | 3.91 VDC | 0 | 0 | 0 | 0 |
| 1769611584 | 3.91 VDC | 0 | 0 | 0 | 0 |
| 1769611490 | 3.9 VDC | 0 | 0 | 0 | 0 |
| 1769608908 | 3.61 VDC | 0 | 0 | 0 | 0 |
| 1769608003 | 3.63 VDC | 0 | 0 | 0 | 0 |
| 1769607098 | 3.64 VDC | 0 | 0 | 0 | 0 |
| 1769606193 | 3.66 VDC | 0 | 0 | 0 | 0 |
| 1769605288 | 3.68 VDC | 0 | 0 | 0 | 0 |
| 1769604383 | 3.7 VDC | 0 | 0 | 0 | 0 |
| 1769604365 | 3.7 VDC | 0 | 0 | 0 | 0 |
| 1769599761 | 3.72 VDC | 0 | 0 | 0 | 0 |
| 1769599679 | 3.72 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)