This is the latest recevied telemetry packets stored in our database for station/object DL6DCA-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Rel_Hum* | Atm_Press* | Value5* |
|---|---|---|---|---|---|
| 1785831391 | 3.46 VDC | 33.1 C | 31.3 % | 1013.75 hPa | 0 |
| 1785830297 | 3.76 VDC | 36.5 C | 27.22 % | 1015 hPa | 0 |
| 1785829973 | 3.73 VDC | 33 C | 31.79 % | 1014.75 hPa | 0 |
| 1785829655 | 3.55 VDC | 25.2 C | 45.88 % | 1006.25 hPa | 0 |
| 1785791444 | 3.31 VDC | 35.1 C | 25.3 % | 1012.63 hPa | 0 |
| 1785782414 | 3.5 VDC | 39.1 C | 22.22 % | 1012.25 hPa | 0 |
| 1785773384 | 3.69 VDC | 42 C | 15.93 % | 1010.88 hPa | 0 |
| 1785771328 | 3.98 VDC | 48.9 C | 9.71 % | 1010.75 hPa | 0 |
| 1785763987 | 3.76 VDC | 43.5 C | 12.93 % | 1011.75 hPa | 0 |
| 1785763783 | 3.73 VDC | 43 C | 14.2 % | 1014.5 hPa | 0 |
| 1785763543 | 3.7 VDC | 42.7 C | 14.88 % | 1011.5 hPa | 0 |
| 1785763057 | 3.47 VDC | 39 C | 25.32 % | 1004.88 hPa | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)