This is the latest recevied telemetry packets stored in our database for station/object KF5IRT. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1769635940 | 419 | 618 | 0 | 0 | 0 |
| 1769634141 | 419 | 619 | 0 | 0 | 0 |
| 1769632343 | 419 | 618 | 0 | 0 | 0 |
| 1769628748 | 421 | 615 | 0 | 0 | 0 |
| 1769626950 | 421 | 614 | 0 | 0 | 0 |
| 1769625152 | 422 | 613 | 0 | 0 | 0 |
| 1769621556 | 425 | 614 | 0 | 0 | 0 |
| 1769617960 | 428 | 610 | 0 | 0 | 0 |
| 1769616129 | 517 | 617 | 0 | 0 | 0 |
| 1769616103 | 522 | 616 | 0 | 0 | 0 |
| 1769615948 | 518 | 615 | 0 | 0 | 0 |
| 1769615830 | 520 | 615 | 0 | 0 | 0 |
| 1769615820 | 522 | 615 | 0 | 0 | 0 |
| 1769615815 | 517 | 615 | 0 | 0 | 0 |
| 1769615810 | 515 | 615 | 0 | 0 | 0 |
| 1769615761 | 520 | 614 | 0 | 0 | 0 |
| 1769615523 | 520 | 613 | 0 | 0 | 0 |
| 1769615301 | 492 | 611 | 0 | 0 | 0 |
| 1769615245 | 492 | 610 | 0 | 0 | 0 |
| 1769615244 | 491 | 609 | 0 | 0 | 0 |
| 1769615175 | 492 | 610 | 0 | 0 | 0 |
| 1769615134 | 491 | 609 | 0 | 0 | 0 |
| 1769615026 | 494 | 607 | 0 | 0 | 0 |
| 1769614937 | 496 | 607 | 0 | 0 | 0 |
| 1769614911 | 495 | 606 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)