This is the latest recevied telemetry packets stored in our database for station/object KS4FUN-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1775203819 | 451 | 599 | 0 | 0 | 0 |
| 1775203620 | 445 | 599 | 0 | 0 | 0 |
| 1775203421 | 448 | 599 | 0 | 0 | 0 |
| 1775202823 | 446 | 599 | 0 | 0 | 0 |
| 1775202624 | 448 | 599 | 0 | 0 | 0 |
| 1775202226 | 447 | 599 | 0 | 0 | 0 |
| 1775202025 | 450 | 599 | 0 | 0 | 0 |
| 1775201826 | 446 | 599 | 0 | 0 | 0 |
| 1775201627 | 446 | 599 | 0 | 0 | 0 |
| 1775201427 | 446 | 599 | 0 | 0 | 0 |
| 1775201228 | 449 | 599 | 0 | 0 | 0 |
| 1775201029 | 447 | 600 | 0 | 0 | 0 |
| 1775200630 | 445 | 600 | 0 | 0 | 0 |
| 1775200431 | 447 | 600 | 0 | 0 | 0 |
| 1775200032 | 448 | 600 | 0 | 0 | 0 |
| 1775199833 | 448 | 600 | 0 | 0 | 0 |
| 1775199633 | 446 | 600 | 0 | 0 | 0 |
| 1775199434 | 445 | 600 | 0 | 0 | 0 |
| 1775199235 | 446 | 600 | 0 | 0 | 0 |
| 1775198637 | 446 | 601 | 0 | 0 | 0 |
| 1775198437 | 449 | 601 | 0 | 0 | 0 |
| 1775198238 | 445 | 601 | 0 | 0 | 0 |
| 1775198039 | 447 | 601 | 0 | 0 | 0 |
| 1775197839 | 445 | 601 | 0 | 0 | 0 |
| 1775197640 | 446 | 601 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)