This is the latest recevied telemetry packets stored in our database for station/object VE7EOL-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732480408 | 13.39 Volts | -0.78 Deg.C | 0 | 0 | 0 |
| 1732480404 | 13.39 Volts | -0.78 Deg.C | 0 | 0 | 0 |
| 1732480366 | 13.36 Volts | 0.2 Deg.C | 0 | 0 | 0 |
| 1732477809 | 13.48 Volts | -0.29 Deg.C | 0 | 0 | 0 |
| 1732477735 | 13.39 Volts | 1.67 Deg.C | 0 | 0 | 0 |
| 1732477730 | 13.54 Volts | 1.67 Deg.C | 0 | 0 | 0 |
| 1732477583 | 13.42 Volts | 5.09 Deg.C | 0 | 0 | 0 |
| 1732477528 | 13.42 Volts | 5.09 Deg.C | 0 | 0 | 0 |
| 1732476971 | 13.42 Volts | -3.22 Deg.C | 0 | 0 | 0 |
| 1732476833 | 13.6 Volts | -4.2 Deg.C | 0 | 0 | 0 |
| 1732469683 | 13.57 Volts | -0.78 Deg.C | 0 | 0 | 0 |
| 1732467026 | 13.6 Volts | -7.62 Deg.C | 0 | 0 | 0 |
| 1732466818 | 13.71 Volts | -10.07 Deg.C | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.0293, 0
Temp: 0, 0.489, -273.15
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)