This is the latest recevied telemetry packets stored in our database for station/object YO6LRV-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Ext* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1775227632 | 13.38 VDC | 0 | 0 | 0 | 0 |
| 1775226731 | 13.4 VDC | 0 | 0 | 0 | 0 |
| 1775225831 | 13.48 VDC | 0 | 0 | 0 | 0 |
| 1775224931 | 13.56 VDC | 0 | 0 | 0 | 0 |
| 1775224031 | 13.4 VDC | 0 | 0 | 0 | 0 |
| 1775223131 | 13.32 VDC | 0 | 0 | 0 | 0 |
| 1775222230 | 13.5 VDC | 0 | 0 | 0 | 0 |
| 1775221332 | 13.58 VDC | 0 | 0 | 0 | 0 |
| 1775220432 | 13.6 VDC | 0 | 0 | 0 | 0 |
| 1775219532 | 13.34 VDC | 0 | 0 | 0 | 0 |
| 1775218632 | 13.52 VDC | 0 | 0 | 0 | 0 |
| 1775217732 | 13.54 VDC | 0 | 0 | 0 | 0 |
| 1775216832 | 13.62 VDC | 0 | 0 | 0 | 0 |
| 1775215932 | 13.56 VDC | 0 | 0 | 0 | 0 |
| 1775215032 | 13.34 VDC | 0 | 0 | 0 | 0 |
| 1775214131 | 13.3 VDC | 0 | 0 | 0 | 0 |
| 1775213231 | 13.24 VDC | 0 | 0 | 0 | 0 |
| 1775212331 | 13.2 VDC | 0 | 0 | 0 | 0 |
| 1775211431 | 13.2 VDC | 0 | 0 | 0 | 0 |
| 1775210531 | 13.16 VDC | 0 | 0 | 0 | 0 |
| 1775209631 | 13.14 VDC | 0 | 0 | 0 | 0 |
| 1775208731 | 13.08 VDC | 0 | 0 | 0 | 0 |
| 1775207832 | 13.22 VDC | 0 | 0 | 0 | 0 |
| 1775206931 | 13.34 VDC | 0 | 0 | 0 | 0 |
| 1775206031 | 13.32 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Ext: 0, 0.02, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)