This is the latest recevied telemetry packets stored in our database for station/object VK5EU-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1765014734 | 467 | 623 | 0 | 0 | 0 |
| 1765014614 | 466 | 622 | 0 | 0 | 0 |
| 1765014495 | 466 | 619 | 0 | 0 | 0 |
| 1765014375 | 466 | 616 | 0 | 0 | 0 |
| 1765014256 | 467 | 609 | 0 | 0 | 0 |
| 1765013308 | 467 | 625 | 0 | 0 | 0 |
| 1765013189 | 470 | 624 | 0 | 0 | 0 |
| 1765013069 | 471 | 623 | 0 | 0 | 0 |
| 1765012949 | 472 | 621 | 0 | 0 | 0 |
| 1765010615 | 472 | 615 | 0 | 0 | 0 |
| 1765002148 | 465 | 639 | 0 | 0 | 0 |
| 1765002027 | 469 | 638 | 0 | 0 | 0 |
| 1765001908 | 469 | 637 | 0 | 0 | 0 |
| 1765001789 | 469 | 635 | 0 | 0 | 0 |
| 1765001668 | 469 | 634 | 0 | 0 | 0 |
| 1765001429 | 472 | 629 | 0 | 0 | 0 |
| 1764992167 | 465 | 634 | 0 | 0 | 0 |
| 1764991742 | 463 | 647 | 0 | 0 | 0 |
| 1764991502 | 469 | 645 | 0 | 0 | 0 |
| 1764991383 | 469 | 645 | 0 | 0 | 0 |
| 1764991264 | 469 | 644 | 0 | 0 | 0 |
| 1764991144 | 471 | 643 | 0 | 0 | 0 |
| 1764991025 | 469 | 640 | 0 | 0 | 0 |
| 1764990904 | 472 | 637 | 0 | 0 | 0 |
| 1764990785 | 474 | 632 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)