This is the latest recevied telemetry packets stored in our database for station/object 2E1GRY-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Sate* | Temp* | Volt* | Alt* | A5* |
|---|---|---|---|---|---|
| 1740265908 | 10 | 24.5 C | 4.06 V | 100 M | 0 |
| 1740265608 | 9 | 24.6 C | 4.06 V | 90 M | 0 |
| 1740265308 | 7 | 24.6 C | 4.06 V | 90 M | 0 |
| 1740265031 | 9 | 24.6 C | 4.07 V | 90 M | 0 |
| 1740264731 | 10 | 24.8 C | 4.07 V | 100 M | 0 |
| 1740264431 | 9 | 24.8 C | 4.07 V | 100 M | 0 |
| 1740264131 | 9 | 24.5 C | 4.07 V | 110 M | 0 |
| 1740263838 | 8 | 23.2 C | 4 V | 100 M | 0 |
| 1740263531 | 9 | 23.2 C | 4 V | 100 M | 0 |
| 1740263231 | 8 | 23.2 C | 4 V | 100 M | 0 |
| 1740262931 | 8 | 23.3 C | 4 V | 60 M | 0 |
| 1740262689 | 9 | 23.3 C | 4.01 V | 70 M | 0 |
| 1740262389 | 8 | 23.3 C | 4.01 V | 100 M | 0 |
| 1740262089 | 8 | 23.4 C | 4.02 V | 90 M | 0 |
| 1740261789 | 9 | 23.5 C | 4.03 V | 100 M | 0 |
| 1740261489 | 6 | 23.7 C | 4.02 V | 90 M | 0 |
| 1740261189 | 8 | 24.1 C | 4.04 V | 100 M | 0 |
| 1740260889 | 7 | 24.6 C | 4.07 V | 90 M | 0 |
| 1740260589 | 5 | 24.8 C | 4.06 V | 80 M | 0 |
| 1740260289 | 6 | 24.8 C | 4.07 V | 90 M | 0 |
| 1740259989 | 8 | 24.9 C | 4.07 V | 90 M | 0 |
| 1740259689 | 8 | 25 C | 4.07 V | 90 M | 0 |
| 1740259389 | 9 | 25 C | 4.06 V | 100 M | 0 |
| 1740259089 | 8 | 24.8 C | 4.07 V | 80 M | 0 |
| 1740258789 | 7 | 23.3 C | 3.99 V | 100 M | 0 |
*Used Equation Coefficients:
Sate: 0, 1, 0
Temp: 0, 0.1, -50
Volt: 0, 0.01, 0
Alt: 0, 10, 0
A5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)