This is the latest recevied telemetry packets stored in our database for station/object F5ODP-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1780621554 | 780 Count | 0 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1780617945 | 744 Count | 0 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1780610948 | 673 Count | 0 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1780607340 | 635 Count | 0 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1780603732 | 597 Count | 0 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1780600124 | 477 Count | 0 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1780596512 | 254 Count | 0 Count | 0 Count | 4.24 VDC | 0 VDC |
| 1780592904 | 1074 Count | 0 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1780589296 | 768 Count | 0 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1780585687 | 729 Count | 0 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1780582078 | 703 Count | 0 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1780578470 | 670 Count | 0 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1780574857 | 622 Count | 0 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1780571250 | 584 Count | 0 Count | 0 Count | 4.22 VDC | 0 VDC |
| 1780567641 | 383 Count | 0 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1780564033 | 346 Count | 0 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1780560424 | 309 Count | 0 Count | 0 Count | 4.24 VDC | 0 VDC |
| 1780556816 | 271 Count | 0 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1780553208 | 233 Count | 0 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1780549600 | 195 Count | 0 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1780545992 | 159 Count | 0 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1780542383 | 123 Count | 0 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1780538775 | 86 Count | 0 Count | 0 Count | 4.23 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)