This is the latest recevied telemetry packets stored in our database for station/object SP1WSR-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Atm_Press* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1791128205 | 23.7 C | 1028.63 hPa | 0 | 0 | 0 |
| 1791123700 | 25.4 C | 1028.75 hPa | 0 | 0 | 0 |
| 1791119195 | 26.9 C | 1027.88 hPa | 0 | 0 | 0 |
| 1791114690 | 25.4 C | 1029.13 hPa | 0 | 0 | 0 |
| 1791110185 | 23.9 C | 1030.13 hPa | 0 | 0 | 0 |
| 1791105680 | 19.5 C | 1031.13 hPa | 0 | 0 | 0 |
| 1791101175 | 16.3 C | 1028.88 hPa | 0 | 0 | 0 |
| 1791096670 | 15 C | 1032.25 hPa | 0 | 0 | 0 |
| 1791092165 | 14.6 C | 1030.13 hPa | 0 | 0 | 0 |
| 1791087660 | 14.3 C | 1031.13 hPa | 0 | 0 | 0 |
| 1791083155 | 14.6 C | 1030.63 hPa | 0 | 0 | 0 |
| 1791078650 | 14.8 C | 0 hPa | 0 | 0 | 0 |
| 1791074145 | 15.7 C | 1029.63 hPa | 0 | 0 | 0 |
| 1791065135 | 16.7 C | 1030.13 hPa | 0 | 0 | 0 |
| 1791060630 | 16.6 C | 1031 hPa | 0 | 0 | 0 |
| 1791056125 | 17 C | 1032.13 hPa | 0 | 0 | 0 |
| 1791051620 | 17.5 C | 1032.38 hPa | 0 | 0 | 0 |
| 1791047115 | 19.4 C | 1032.25 hPa | 0 | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Atm_Press: 0, 0.125, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)