This is the latest recevied telemetry packets stored in our database for station/object VE9SC-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732477545 | 478 | 588 | 0 | 0 | 0 |
| 1732477425 | 480 | 586 | 0 | 0 | 0 |
| 1732477323 | 482 | 583 | 0 | 0 | 0 |
| 1732477270 | 481 | 579 | 0 | 0 | 0 |
| 1732477240 | 477 | 577 | 0 | 0 | 0 |
| 1732474990 | 479 | 590 | 0 | 0 | 0 |
| 1732474974 | 474 | 589 | 0 | 0 | 0 |
| 1732474943 | 479 | 589 | 0 | 0 | 0 |
| 1732474889 | 481 | 588 | 0 | 0 | 0 |
| 1732474793 | 481 | 586 | 0 | 0 | 0 |
| 1732474746 | 480 | 585 | 0 | 0 | 0 |
| 1732474598 | 482 | 580 | 0 | 0 | 0 |
| 1732474530 | 480 | 577 | 0 | 0 | 0 |
| 1732474475 | 482 | 573 | 0 | 0 | 0 |
| 1732474467 | 481 | 572 | 0 | 0 | 0 |
| 1732469972 | 481 | 586 | 0 | 0 | 0 |
| 1732469955 | 481 | 585 | 0 | 0 | 0 |
| 1732469812 | 482 | 584 | 0 | 0 | 0 |
| 1732469673 | 481 | 581 | 0 | 0 | 0 |
| 1732469439 | 481 | 574 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)