This is the latest recevied telemetry packets stored in our database for station/object GW3ATZ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1780619837 | 91 Count | 138 Count | 69 Count | 4.22 VDC | 0.14 VDC |
| 1780618029 | 83 Count | 124 Count | 63 Count | 4.24 VDC | 0.16 VDC |
| 1780616220 | 75 Count | 110 Count | 57 Count | 4.25 VDC | 0.16 VDC |
| 1780614412 | 67 Count | 97 Count | 51 Count | 4.24 VDC | 0.16 VDC |
| 1780612604 | 59 Count | 83 Count | 45 Count | 4.2 VDC | 0.16 VDC |
| 1780603667 | 19 Count | 28 Count | 15 Count | 4.24 VDC | 0.14 VDC |
| 1780598243 | 675 Count | 1000 Count | 503 Count | 4.21 VDC | 0.14 VDC |
| 1780596430 | 659 Count | 975 Count | 489 Count | 4.2 VDC | 0.14 VDC |
| 1780592814 | 644 Count | 953 Count | 478 Count | 4.22 VDC | 0.14 VDC |
| 1780589292 | 630 Count | 932 Count | 468 Count | 4.21 VDC | 0.14 VDC |
| 1780587484 | 622 Count | 922 Count | 462 Count | 4.2 VDC | 0.14 VDC |
| 1780585676 | 614 Count | 913 Count | 456 Count | 4.23 VDC | 0.14 VDC |
| 1780583868 | 607 Count | 904 Count | 451 Count | 4.23 VDC | 0.14 VDC |
| 1780582059 | 599 Count | 893 Count | 445 Count | 4.19 VDC | 0.14 VDC |
| 1780580250 | 593 Count | 886 Count | 441 Count | 4.25 VDC | 0.14 VDC |
| 1780578442 | 587 Count | 878 Count | 437 Count | 4.23 VDC | 0.14 VDC |
| 1780576634 | 579 Count | 865 Count | 431 Count | 4.22 VDC | 0.14 VDC |
| 1780574826 | 571 Count | 856 Count | 425 Count | 4.25 VDC | 0.14 VDC |
| 1780573017 | 565 Count | 850 Count | 421 Count | 4.26 VDC | 0.14 VDC |
| 1780571209 | 557 Count | 839 Count | 415 Count | 4.2 VDC | 0.14 VDC |
| 1780569401 | 550 Count | 832 Count | 410 Count | 4.21 VDC | 0.14 VDC |
| 1780567692 | 542 Count | 820 Count | 404 Count | 4.25 VDC | 0.14 VDC |
| 1780565884 | 535 Count | 810 Count | 399 Count | 4.23 VDC | 0.14 VDC |
| 1780564076 | 527 Count | 800 Count | 393 Count | 4.22 VDC | 0.16 VDC |
| 1780562267 | 519 Count | 789 Count | 387 Count | 4.19 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)