This is the latest recevied telemetry packets stored in our database for station/object W4KEL-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1780595398 | 12.45 | 32.96 | 0 | 0 | 0 |
| 1780593596 | 12.45 | 31.99 | 0 | 0 | 0 |
| 1780591795 | 12.45 | 31.5 | 0 | 0 | 0 |
| 1780589994 | 12.45 | 30.52 | 0 | 0 | 0 |
| 1780588193 | 12.45 | 29.54 | 0 | 0 | 0 |
| 1780586392 | 12.42 | 28.07 | 0 | 0 | 0 |
| 1780582791 | 12.45 | 25.63 | 0 | 0 | 0 |
| 1780579199 | 12.45 | 22.7 | 0 | 0 | 0 |
| 1780577391 | 12.48 | 21.23 | 0 | 0 | 0 |
| 1780575592 | 12.48 | 19.27 | 0 | 0 | 0 |
| 1780573793 | 12.48 | 17.81 | 0 | 0 | 0 |
| 1780571993 | 12.48 | 17.32 | 0 | 0 | 0 |
| 1780570194 | 12.48 | 16.83 | 0 | 0 | 0 |
| 1780566595 | 12.51 | 17.32 | 0 | 0 | 0 |
| 1780562995 | 12.51 | 18.29 | 0 | 0 | 0 |
| 1780561195 | 12.51 | 18.78 | 0 | 0 | 0 |
| 1780559396 | 12.51 | 19.27 | 0 | 0 | 0 |
| 1780557597 | 12.51 | 19.76 | 0 | 0 | 0 |
| 1780555797 | 12.51 | 20.25 | 0 | 0 | 0 |
| 1780553997 | 12.54 | 20.74 | 0 | 0 | 0 |
| 1780552198 | 12.51 | 21.23 | 0 | 0 | 0 |
| 1780550399 | 12.51 | 21.72 | 0 | 0 | 0 |
| 1780548599 | 12.51 | 22.7 | 0 | 0 | 0 |
| 1780546799 | 12.51 | 23.18 | 0 | 0 | 0 |
| 1780545000 | 12.51 | 24.16 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 0.0293, 0
Value2: 0, 0.489, -273.15
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)