This is the latest recevied telemetry packets stored in our database for station/object KH6UU-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1791068157 | 431 Volts | 645 Deg.F | 503 | 0 | 0 |
| 1791068133 | 433 Volts | 643 Deg.F | 258 | 0 | 0 |
| 1791068128 | 432 Volts | 643 Deg.F | 253 | 0 | 0 |
| 1791068043 | 432 Volts | 643 Deg.F | 247 | 0 | 0 |
| 1791068000 | 432 Volts | 644 Deg.F | 253 | 0 | 0 |
| 1791067648 | 428 Volts | 646 Deg.F | 258 | 0 | 0 |
| 1791067545 | 430 Volts | 646 Deg.F | 259 | 0 | 0 |
| 1791067512 | 431 Volts | 646 Deg.F | 260 | 0 | 0 |
| 1791067444 | 430 Volts | 646 Deg.F | 259 | 0 | 0 |
| 1791067349 | 431 Volts | 646 Deg.F | 257 | 0 | 0 |
| 1791067289 | 429 Volts | 646 Deg.F | 259 | 0 | 0 |
| 1791067229 | 430 Volts | 646 Deg.F | 257 | 0 | 0 |
| 1791067168 | 430 Volts | 646 Deg.F | 251 | 0 | 0 |
| 1791067108 | 429 Volts | 646 Deg.F | 255 | 0 | 0 |
| 1791067048 | 428 Volts | 645 Deg.F | 251 | 0 | 0 |
| 1791067010 | 430 Volts | 645 Deg.F | 257 | 0 | 0 |
| 1791066993 | 431 Volts | 645 Deg.F | 257 | 0 | 0 |
| 1791066949 | 431 Volts | 645 Deg.F | 258 | 0 | 0 |
| 1791066881 | 431 Volts | 644 Deg.F | 258 | 0 | 0 |
| 1791066788 | 432 Volts | 643 Deg.F | 257 | 0 | 0 |
| 1791066771 | 431 Volts | 643 Deg.F | 253 | 0 | 0 |
| 1791066714 | 460 Volts | 643 Deg.F | 264 | 0 | 0 |
| 1791066186 | 428 Volts | 643 Deg.F | 261 | 0 | 0 |
| 1791066158 | 428 Volts | 643 Deg.F | 253 | 0 | 0 |
| 1791066114 | 426 Volts | 643 Deg.F | 254 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 1, 0
Temp: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)