This is the latest recevied telemetry packets stored in our database for station/object HS5TQA-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TEMP* | HUM* | BAR* | VBAT* | IBAT* |
|---|---|---|---|---|---|
| 1780872065 | 32.1 °C | 71.1 %RH | 1006 hPa | 3.98 V | 78.5 mA |
| 1780871461 | 32.2 °C | 71 %RH | 1006 hPa | 3.98 V | 77.6 mA |
| 1780869647 | 32.2 °C | 70.6 %RH | 1006 hPa | 3.98 V | 77.8 mA |
| 1780869043 | 32.3 °C | 70.4 %RH | 1005 hPa | 3.98 V | 79.9 mA |
| 1780868439 | 32.4 °C | 70.3 %RH | 1005 hPa | 3.98 V | 79.9 mA |
| 1780867834 | 32.4 °C | 70.2 %RH | 1005 hPa | 3.98 V | 78.8 mA |
| 1780867230 | 32.4 °C | 70 %RH | 1006 hPa | 3.98 V | 78.3 mA |
| 1780866626 | 32.5 °C | 70 %RH | 1006 hPa | 3.97 V | 140.3 mA |
| 1780866022 | 32.6 °C | 69.6 %RH | 1006 hPa | 3.98 V | 78.8 mA |
| 1780865417 | 32.6 °C | 69.5 %RH | 1006 hPa | 3.98 V | 81.3 mA |
| 1780864813 | 32.7 °C | 69.3 %RH | 1006 hPa | 3.98 V | 77.6 mA |
| 1780864208 | 32.7 °C | 69.2 %RH | 1006 hPa | 3.98 V | 79.5 mA |
| 1780863604 | 32.8 °C | 69 %RH | 1006 hPa | 3.98 V | 77 mA |
| 1780863029 | 32.9 °C | 69.3 %RH | 1006 hPa | 3.98 V | 80 mA |
| 1780862414 | 32.9 °C | 69.2 %RH | 1006 hPa | 3.98 V | 77 mA |
| 1780862395 | 32.9 °C | 69.2 %RH | 1006 hPa | 3.98 V | 80.3 mA |
| 1780862259 | 32.9 °C | 69.2 %RH | 1006 hPa | 3.98 V | 78.5 mA |
| 1780862090 | 32.9 °C | 69.2 %RH | 1006 hPa | 3.99 V | 76.5 mA |
| 1780861790 | 32.9 °C | 69.3 %RH | 1006 hPa | 3.98 V | 79.8 mA |
| 1780861486 | 32.7 °C | 69.5 %RH | 1006 hPa | 3.99 V | 79.9 mA |
*Used Equation Coefficients:
TEMP: 0, 0.01, 0
HUM: 0, 0.1, 0
BAR: 0, 0.1, 800
VBAT: 0, 0.01, 0
IBAT: 0, 0.1, -100
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)