This is the latest recevied telemetry packets stored in our database for station/object CE3SUR-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Sate* | Temp* | Volt* | Alt* | A5* |
|---|---|---|---|---|---|
| 1791094252 | 7 | 18.1 C | 4.23 V | 510 M | 0 |
| 1791090235 | 7 | 18.8 C | 4.23 V | 490 M | 0 |
| 1791086063 | 6 | 19.5 C | 4.23 V | 490 M | 0 |
| 1791082615 | 6 | 20.1 C | 4.23 V | 520 M | 0 |
| 1791079064 | 5 | 21.1 C | 4.23 V | 530 M | 0 |
| 1791075221 | 6 | 22 C | 4.22 V | 520 M | 0 |
| 1791072220 | 5 | 23 C | 4.23 V | 520 M | 0 |
| 1791070045 | 6 | 23.6 C | 4.23 V | 520 M | 0 |
| 1791066653 | 3 | 25.1 C | 4.23 V | 510 M | 0 |
| 1791063123 | 5 | 26.3 C | 4.22 V | 470 M | 0 |
| 1791059187 | 6 | 26.6 C | 4.22 V | 530 M | 0 |
| 1791054986 | 6 | 26.2 C | 4.23 V | 480 M | 0 |
| 1791051109 | 5 | 25.3 C | 4.23 V | 520 M | 0 |
| 1791046909 | 5 | 23.8 C | 4.23 V | 530 M | 0 |
| 1791043337 | 6 | 22.1 C | 4.23 V | 500 M | 0 |
| 1791039792 | 5 | 20.2 C | 4.23 V | 500 M | 0 |
| 1791035601 | 6 | 18.4 C | 4.23 V | 520 M | 0 |
| 1791032215 | 6 | 17.4 C | 4.23 V | 580 M | 0 |
| 1791028594 | 7 | 17.2 C | 4.23 V | 500 M | 0 |
| 1791024394 | 5 | 17.4 C | 4.23 V | 530 M | 0 |
| 1791020413 | 7 | 17.5 C | 4.23 V | 510 M | 0 |
| 1791016861 | 9 | 17.6 C | 4.23 V | 520 M | 0 |
| 1791013947 | 8 | 17.8 C | 4.23 V | 510 M | 0 |
*Used Equation Coefficients:
Sate: 0, 1, 0
Temp: 0, 0.1, -50
Volt: 0, 0.01, 0
Alt: 0, 10, 0
A5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)